Barber Chair Hydraulic Pump Chair Hydraulic Lift Pump

Description This barber chair hydraulic pump has an adjustable height range of 11 cm/4.3in, you can easily complete the lift of the chair according to your needs. And it has a strong load-bearing capacity, you do not have to worry that it will easily break down. If you need chair lifting and weight-bearing, then it is very suitable for you!   Key Features Adjustable Height: This is a 4-bolt pattern pump, which has an adjustable height range of 11cm/ 4.3". You can install it on the chair to adjust it to the right height for your needs, which is very practical.   Good Material: The pump body is made of cast iron and the pump has a plastic casing with painting technology, you do not have to worry about it will be deformed in transit and it has a longer service life.   Easy to Use: You only need to step on the lever to make the pump rise or fall. It is very labor-saving and does not need you to adjust it manually.   High Load-bearing Capacity: It can withstand 440 pounds of weight, so you don't have to worry that it will break easily because of the weight-bearing problem.   Easy to Install: You just need to install the lever and the plastic cover, then install the entire lift pump on the chair that you want to lift.   Easy to Clean: The smooth surface is not easy to accumulate dust. Even if it gets dirty you can easily clean it without much effort or time.   Wide Application: It is suitable as a replacement part for most standard styling chairs.   Customer Service: We aim to provide quality products and services. If you have any problems, please free to contact us. We will reply and solve the problem for you as soon as possible.   Details Lever: This item has an ergonomically designed lever that has a suitable position. You can easily adjust the height of the lift pump without bending over.   Strong Housing: The painted housing can make this lift pump not easy to rust, hardness is strong, and you can use a long time.   Application This barber chair hydraulic pump is suitable as a replacement part for most standard styling chairs in bars, restaurants, hairdressers and other places. How to Confirm Whether It Matches Your Seat Needs to Pay attention to the Following Four Aspects. 1.Upper interface requirements: Top thread of spindle: m8. 2.Shaft Diameter: 26mm. 3.Cone Ratio of shaft: 1:13. 4.Requirements for base connection: 4 holes and the diagonal spacing of holes is 115mm. And please bring four M6 nuts. Specification Model: YL700 Name: Barber Chair Hydraulic Pump Pump Body Material: Cast Iron Pump Casing Material: Plastic Surface Treatment: Painting Color: Silver Weighr Capacity: 200kg/440 pounds Thread: M8 Height: 38cm / 15.0in Height After Stretching: 49cm / 19.3in Adjustable Height: 11cm / 4.3in Connecting Shaft Diameter: 2.6cm/ 1.02in Hole Distance Between the Pump and the Base: 11.5cm/ 4.53in   Package Included 1* Barber Chair Hydraulic Pump   Notes 1.The package does not contain the bottom disc and chair, so if you need it, please prepare it in advance. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.